Trailer suspension with brake for single wide tires

Description

The COMVEC trailer suspension for single wide tires is designed for models in the scale 1: 14.5 and highly detailed. It has double ball-bearing hubs with functional parking brake in the appearance of a disc brake. The swingarm and mount are made of stainless steel and micro-welded by hand - of course made in Germany. All turned parts are made of stainless steel or aluminum. The swingarm can be attached to a trailer using M2 screws. As air bellows, the COMVEC dummy bellows are used in different hardnesses. The spring stiffness can be chosen individually to perfectly adapt to the trailer. The coil springs of the dummy bellows can easily be exchanged afterwards for a different hardness or replaced. The chassis is optically rounded off by dummy shock absorbers. The outer width of the chassis with rim and tires is approx. 169mm. The swingarms can be freely positioned in width.

This product includes a complete axle "fully equipped". All components are also available in the following individual sets:

• Trailer axle for single wide tires
• Axle hub with brake for trailer chassis
• Damper set for trailer chassis
• Swingarm + mounting for trailer chassis

The brake is controlled by a servo through a Bowden cable (sold separately). Depending on the Bowden cable length, a servo can control 2-3 brakes (2 brakes per axle). It is a parking brake that should only be used while stationary and never while driving. The brake can also be installed as a dummy without function, if the internal mechanism is not mounted.

Matching rims: Veroma 1:16 trailer wheels for wide tires, e.g. 227561, 227561

Recommendations for spring hardness:

• Hardness 1: for lift axles or very light trailers
• Hardness 2: for three-axle trailers
• Hardness 3: for two-axle trailers
• Hardness 4: for very heavy trailers

Scope of delivery:

• a trailer axle in parts with instructions
• Bellows: as selected
• Tires and rims: as selected