Trailer mudguard for double tires (52mm)

Item number: 22300210

This trailer fender for double tires is manufactured as a 3d print and is suitable for models in 1:16 - 1:14.5 with a wheel diameter of approx. 52mm

Category: Suspension and accessories


starting from 19,00 €

including 19% VAT. , plus shipping

Available now!

Shipping time: 2 - 3 workdays



Kotflügel-Montagesatz
  • Mounting kit for fenders

    The mounting kit (e.g. suitable for the COMVEC fenders) is used to attach fenders to the chassis.

    A set contains the following components:

    • 4 mounting rods (40mm long) with M2 thread on one side
    • Screws to attach the mounting rods to the chassis (various lengths)
    • 8 mounting tabs for mounting the fender to the mounting bar
    • Screws (M1.6) for mounting the fender (not included) to the mounting brackets. The screws are screwed directly into the material.
  • Scale mounting kit for fenders

    The mounting kit (e.g. suitable for the COMVEC fenders) is used to attach fenders to the chassis.

    A set contains the following components:

    • 4 mounting rods (40mm long) with M2 thread on one side
    • Screws to attach the mounting rods to the chassis (various lengths)
    • 8 mounting tabs for mounting the fender to the mounting bar
    • Screws (M1) for mounting the fender (not included) to the mounting brackets
Your configuration

This trailer fender for double tires is manufactured as a high-quality resin vacuum casting and is suitable for models in 1:16 - 1:14.5 with a wheel diameter of approx. 52mm.

Like the original, the fender is attached to the support rods with clamping plates. The support rods are screwed to the frame of the trailer. As standard, the clamping plates are bolted to the fenders using M1.6 screws. For the highest level of detail, the scale mounting kit with super-fine M1 screws can be used as an option.

Optionally, the fender can also be equipped with a rubber splash guard (see "suitable for this article").

Note on the manufacturing process: Resin castings are supplied unpainted and with sprue. The sprue must be removed and sanded. Before painting, the parts should be cleaned with silicone remover.

Please login first to add a tag.